Rivera-primo Chain Drive User Manual download pdf

RIVERA ENGINEERING’S

CHAIN DRIVE INSTALLATION INSTRUCTIONS

PLEASE NOTE: primary chain, compensating

sprocket, clutch basket group, & chain tension-

er must be installed simultaneously as a com-

plete assembly.

1) Assemble & install the chain tensioner assembly over

the primary chain as shown in figure 1.

2) Install the compensator sprocket with extender & spacer

(numbers 5, 6, & 7, FIG 2)(#7 is not included in this kit),

primary chain, chain tensioner, and clutch basket simulta-

neously onto the motor drive shaft & transmission main

shaft. Rotate the chain drive slightly as needed to allow the splines to line-up.

3) Install the chain tensioner nut loosely on the chain tensioner bolt.

4) Install the sliding cam onto the compensator sprock-

et, & slide the compensating sprocket cover-assembly

(#3) over the cam.

5) Apply 2 drops of Rivera "Red" thread-lock on the

threads of the motor drive shaft, & install the motor

nut loosely with the fingers at this time.

The hex spacer (#7) and spacer (#2) as seen in fig.2 are not provided

in Rivera Engineering’s chain drive kit. These components are

required with some applications, and can be purchased from your

local Harley-Davidson dealer.

FIG 2

1 2

RIVERA ENGINEERING’SCHAIN DRIVE INSTALLATION INSTRUCTIONSPLEASE NOTE: primary chain, compensatingsprocket, clutch basket group, & chain tension-

Page 2

6) Apply 2 drops of Rivera "red" thread-lock on the threads of the transmission main-shaft and loosely install the clutch hub nut (left ha

No comments

Rivera-primo Chain Drive User Manual