Rivera-primo PC-3000 User Manual download pdf

PPCC--33000000 IINNSSTTRRUUCCTTIIOONNSS

The PC-3000 enables factory torque specifications to be applied to the clutch hub nut when installing a Rivera Engineering

Pro Clutch, or a Primo Belt Drive kit. The PC-3000 also allows the removal of the clutch hub nut without using an impact

or air wrench. With the PC-3000 engaging the splines in the clutch hub as shown, the handle should be located so that

when the torque is applied to the nut (left handed threads) the clutch hub cannot rotate. Reverse the process when remov-

ing the clutch hub nut. Ensure that the teeth of the PC-3000 are fully engaged with the splined portion of the clutch hub.

When tightening the clutch hub (left hand threads) the

PC-3000 can be positioned as shown to hold the clutch

hub immobilized allowing the correct torque specification

to be applied to the nut (counterclockwise pressure).

When loosening the clutch hub nut (left handed

threads) the PC-3000 can be positioned a s

shown to hold the clutch hub as pressure is

applied to loosen the nut (clockwise pressure).

RIVERA ENGINEERING

12450 Whittier Blvd, Whittier, CA 90602

(562) 907-2600 fax (562) 907-2606

LEFT HAND THREADS TIGHTEN COUNTER CLOCKWISE!

LEFT HAND THREADS LOOSEN CLOCKWISE!

PPCC--33000000 IINNSSTTRRUUCCTTIIOONNSSPPCC--33000000 IINNSSTTRRUUCCTTIIOONNSSThe PC-3000 enables factory torque specifications to be applied to the

No comments

Rivera-primo PC-3000 User Manual